WARNING! Before installing or removing an eForms device , be sure that printer power is OFF! Damage to printer, module, or stored information could result from attempting to install or remove any memory hardware with the printer on!
Most printers will be supported by the SmartBOX
Into what printer is the e-form device being installed?
| (see note: Use of Registration / Keypacket stock in the Laserjet 5) |
| Very limited availability |
| Note: chips for some printers in this group can be (but are not usually) setup in such a way that they will not be moveable from one printer to another. Please check with us before changeing printers |
Note: Chips can generally be moved between printers within each group above. E.g. You can upgrade your 2200 to a 2300 and will not require a new chip; just move the chip from the 2200 to the 2300. If you need to move between groups, replacement chips or boxes will be required at a minimal charge.
If your printer is not on this list, we can probably still support it. Just about any printer will work with The SmartBOX. To be sure, please contact us with the printers make and model.
Printers that appear to have internal eForms support: